घर > उत्पादों > >

Tesla Model S 2021+ Rear Frunk Apron 40x22x6cm Black Plastic

Tesla Model S frunk apron

EV car rear apron

Tesla Model S exterior trim

उत्पत्ति के प्लेस:

चीन

ब्रांड नाम:

CFN

मॉडल संख्या:

1564260-00-सी

हमसे संपर्क करें

बोली मांगें

Tesla Model S 2021+ Rear Frunk Apron 40x22x6cm Black Plastic

उत्पाद का विवरण

डिज़ाइन:

चिकना और आधुनिक डिजाइन

अनुकूलता:

सार्वभौमिक

रंग:

काला

सामग्री:

उच्च गुणवत्ता वाला प्लास्टिक

वज़न:

3.2 किग्रा

आकार:

40*22*6

प्रमुखता देना:

Tesla Model S frunk apron

EV car rear apron

Tesla Model S exterior trim

भुगतान और शिपिंग की शर्तें

न्यूनतम आदेश मात्रा

मूल्य

Negotible

पैकेजिंग विवरण

114*57*10 एक टुकड़ा, बॉक्स

प्रसव के समय

5-10 काम के दिन

भुगतान शर्तें

एल/सी, डी/ए, डी/पी, टी/टी, वेस्टर्न यूनियन, मनीग्राम

संबंधित उत्पाद

Tesla Model X 2021+ Left Fog Light Bracket 44x35x6cm Black ABS

सबसे अच्छी कीमत पाएं

Tesla Model X 2021+ RH Small Fog Light Bracket 12x10x4cm Black

सबसे अच्छी कीमत पाएं

Tesla Model X 2021+ Left Small Fog Light Bracket 12x10x4cm Black

सबसे अच्छी कीमत पाएं

Right Fog Light Holder for Tesla Model X 2021+ 18x9x5cm Black

सबसे अच्छी कीमत पाएं

हमसे संपर्क करें

अब संपर्क करें

उत्पाद का वर्णन

Frunk Apron - Rear for 2021+ Tesla Model S | 1564260-00-C (CFN Brand)

Name: Tesla Model S 2021+ Rear Frunk Apron 40x22x6cm Black Plastic
Brand: Guangzhou Fuheng Auto Parts Supply Chain Co., Ltd.
SKU: 1564260-00-सी
Availability: InStock

This rear frunk apron (part number 1564260-00-C) is an OEM-matching component exclusively designed for 2021 and later Tesla Model S, precisely fitting the rear section of the front trunk (frunk) cavity. Its core functions focus on structural protection and functional coordination: first, it acts as a "barrier" between the frunk interior and the front-end mechanical area, blocking dust, water droplets (from frunk drainage), and small items (e.g., loose tools) from falling into the under-hood component zone, avoiding interference with the EV’s cooling system or wiring. Second, it reinforces the frunk’s rear edge rigidity, preventing deformation of the frunk opening during frequent opening/closing, and ensures a tight seal with the frunk lid—reducing wind noise when driving at high speeds.

Crafted from OEM-grade PP (Polypropylene) plastic with a textured black finish, the apron balances lightweight (≤120g) and durability. The material resists impact from minor collisions (e.g., accidental contact with frunk-stored items) without cracking, and has excellent weather resistance: it withstands -30°C to 80°C temperature fluctuations (suitable for extreme climates) and resists UV fading (passes 400-hour ASTM G154 UV tests), maintaining long-term color consistency with the frunk’s inner trim. The textured surface also matches the Model S’s factory frunk interior style, avoiding visual inconsistency.

Installation follows Tesla’s factory specifications, taking 20–25 minutes with basic tools (trim tool, 7mm socket): first, open the frunk and use a trim tool to gently detach the frunk’s inner side trim panels (avoid scratching the plastic); locate the old apron’s mounting points, remove 4 plastic clips and 2 small bolts to take out the old part; clean the mounting surface to remove dust, then align the CFN apron with the frunk’s rear edge—snap the clips into place and tighten the bolts to 4±0.5 Nm (per Tesla torque guidelines); finally, reinstall the side trim panels and check that the apron fits flush with the frunk edge.

After-sales support includes a 3-year warranty (covering manufacturing defects like cracked plastic or misaligned clips, excluding damage from improper disassembly or heavy impact) and protective packaging: 1 piece per pack (wrapped in anti-scratch film + cardboard) to prevent transport damage. Bulk packs (15 pieces/box) are available for repair shops or Tesla service centers, ensuring reliable replacement for every 2021+ Model S.

टैग：